We sell factory-made ERCO jaws and parts. Shrinking jaws for the 1447 kick shrinkers, and the 476 power shrinker. We also provide factory parts for the ERCO Flangers. We also sell stretch jaws for these machines, and any parts for ERCO machines.

ERCO Shrink Jaws Front View	ERCO Shrink Jaws Side View
ERCO Shrink Jaws Stipple and Bare	ERCO Stretch Jaws Stipple and Bare
The images above show ERCO shrink jaws, and jaw surfaces with medium stipple and shrink and stretch jaws with surfaces bare. We can provide six (6) different grades of jaw surface finish for these ERCO shrinker-stretcher jaws, Super Satin (#000), Satin (#00), Extra Fine (#0), Fine (#1), Standard (#2), and Coarse (#3). We will ask you about "stipple" when you are ready to purchase jaws. Or, please tell us the alloy, thickness and temper of the metal you are working. This way we can help you set the "grip" of the jaws for ideal machine performance and best appearance of your finished product. Beautiful 2024 T3 .032 parts can be made with our Extra Fine (#0) finish. Conversely, .190 316 half hard would be best done with a Coarse (#3) stipple finish. Remember, you can go less coarse on stipple for stretching, but shrinking requires more force and, subsequently, more "traction."
ERCO Stretch Jaws Front View	ERCO Stretch Jaws Side View
These images are of the ERCO Stretcher jaws. If you notice there are no mounting holes on the base flanges of these jaws. All of these ERCO stretch and shrink jaws are brand new, and come to you undrilled. You will have to locate them properly in your machine and then drill the mounting holes. CALL FOR PRICES Extended jaws, ERCO 476. We also offer these jaws in complete sets:
ERCO Extended Shrink Jaws Front View	ERCO Extended Shrink Jaws Side View
CALL FOR PRICES
ERCO Model #1447 Kick Shrinker	ERCO Model #476 Power Shrinker
Townsend kick shrinkers also use the ERCO jaws, as they are interchangeable. We also provide parts for the ERCO Flangers. CALL FOR PRICES