ProFormer Sheet Metal Brakes are built in the U.S.A. They are built for the long run: you can rebuild clamp and apron assemblies, vertical guides, cams and apron hinge pins or bushings. Entire top clamp assemblies or nose bars can be replaced. For BP & U models, replacement finger sets are very reasonably priced.

Minimum reverse bend for all models is 1/2". For 1/4" return, see 1/4" minimum reverse bend apron in "options" on ProFormer Brakes Specs page.

Beam adjustment (maximum clamp set back) for all models is 1". Additional set back may be ordered.

Heavy truss rods under table, on and behind clamp, and under apron are adjustable so you can maintain true centers.

There are 47 models, including leaf brakes (standard brakes) and box and pan brakes (finger brakes) with all specs (bending length, depth of box or pan, reverse bend, counter weights, bolt-on apron angle, lift of beam, shipping weight, and F.O.B factory price) listed on the ProFormer Brakes Specs Page .

For shipping prices, add drop shipping from Indiana.

See L9716 Specifications .

For specifications for brakes shown above, click on link: BP3620 , BP4816 , S4018 , U4-4816 , S3620

For specifications for brakes shown above, click on link: BP7216 , S7216 , S7222 , S4018.